The DMX512.com Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

SMF - Just Installed!

Pages: 1 [2]

Author Topic: SIMPLE LED LIGHT CONTROLLED BY DMX512 SIGNAL  (Read 34782 times)

tendai02

  • Newbie
  • *
  • Posts: 10
Re: SIMPLE LED LIGHT CONTROLLED BY DMX512 SIGNAL
« Reply #15 on: February 03, 2011, 10:30:34 AM »
Thanks Colby
I finally managed to make it work. I am now trying to design a power socket which can swicth off power totally to a load (e.g. a tV set when it is left in standby for 5 min or more)
Logged

Mungoo

  • Newbie
  • *
  • Posts: 1
Re: SIMPLE LED LIGHT CONTROLLED BY DMX512 SIGNAL
« Reply #16 on: March 22, 2012, 10:01:59 AM »
I was soldering new LEDs to my xbox 360 controller motherboard. After I successfully took off the player 2 green led to replace it with a new LED, I noticed that when I put the battery pack back in all of the other LEDs stopped working but the controller still worked fine. Did I accidentally take off the solder joint which caused all of the other LEDs to stop working or what? How could I fix this? Please help!
Logged

biodsMip

  • Newbie
  • *
  • Posts: 3
-
« Reply #17 on: June 25, 2022, 09:01:48 AM »
The green LED on my USB DMX dongle comes  once I plug in the USB chord and stays on even when I'm not sending a signal. The dongle seems to work fine with my Express

I was wondering if the green light being on all the time means that something is conducting when it shouldn't be.

Any words of wisdom are appreciated.
Logged
Pages: 1 [2]
« previous next »